A mathematical model for predicting indoor PM 2.5 concentration under different ventilation methods in residential buildings
Wei Xie, Yuesheng Fan, Xin Zhang, Guoji Tian, Pengfei Si
Source record
Source: Crossref
Published: Feb 18, 2020
DOI: 10.1177/0143624420905102
Open original source ↗Source abstract
Experiments and theoretical analyses are conducted in a residential building in Changzhou to study indoor PM 2.5 concentrations by establishing a combined parameter model. An alternative method for predicting the particle deposition rate and penetration coefficient is proposed, and its accuracy is tested and verified by experiments using time-dependent concentrations and air exchange rate measurements. The predicted PM 2.5 penetration coefficient increased from 0.70 to 0.88 when the air exchange rates were varied from 0.2 h −1 to 0.5 h −1 . In addition, outdoor sources of PM 2.5 dominantly contributed approximately 90% to 98% to the indoor concentrations for both mechanically and naturally ventilated structures. Finally, a mathematical model for predicting the indoor concentration is presented using a mass balance equation, which estimates the parameter values in the building. The indoor PM 2.5 concentrations ranged from 40 to 46 µg/m 3 by using a fresh air system with 82% filtration efficiency, while those by using open windows for natural ventilation ranged from 105 to 118 µg/m 3 when the outdoor PM 2.5 concentration ranged from 115 to 137 µg/m 3 . The results of this study can be used to estimate the indoor particle level. Practical application: By applying the ventilation criteria for acceptable indoor air quality in ASHRAE Standard 62.1, the indoor PM 2.5 monitoring results show serious pollution in dwellings in 2018. More dwellings are expected to maintain a clean indoor environment in the future. Thus, it is crucial to consider the indoor PM 2.5 pollution risk in the building design to prevent the possible consequences of unsafe high indoor concentrations. The use of this prediction model, as discussed in this article, will provide further information on the influence of the particle deposition rate ( K) and penetration coefficient ( P) on indoor PM 2.5 concentrations.
Evidence graph
No public relationships recorded yet.
Integrity note: This page is a factual metadata record created by deterministic ingestion. It is not a claim that the work moves a mathematical frontier or has been independently verified.